Black Forest Labs' own API is the cheapest steady FLUX 3 Video price we could verify: $0.15 a second for 720p with audio, no subscription. fal.ai charges $0.17, and its FLUX 3 Max variant is $0.0425 only until November 7. Krea works out to about $0.135 to $0.257 on plans. Higgsfield, Invideo and Magnific list figures we could not re-confirm. Vidwip is $0.205 to $0.260 a second, seventh of eight, in exchange for a timeline and 16 video models.
The cheapest steady price we could verify for FLUX 3 Video in November 2026 is Black Forest Labs’ own API: $0.15 a second at 720p with audio, paid per second. fal.ai is next at $0.17 a second, with a promotional $0.0425 on its FLUX 3 Max variant that ends on November 7.
Black Forest Labs (BFL) writes the name as “FLUX 3 Video”, and Vidwip writes it as FLUX.3 Video. This post is the same model. It converts every platform to dollars per second and puts Vidwip at its true price position.
TL;DR: cheapest FLUX 3 Video provider
BFL’s pricing page lists the lowest steady rate. Below it, the order depends on whether you trust figures we could only read on 2026-10-30.
| Rank | Provider | 720p, $/s | How sure we are |
|---|---|---|---|
| 1 | fal.ai FLUX 3 Max (promo) | $0.0425 | Read live, ends Nov 7, fal’s own variant |
| 2 | Invideo (best-value plan) | from $0.109 | Listed 2026-10-30, not re-confirmed |
| 3 | Krea | about $0.135 to $0.257 | Derived from video counts |
| 4 | Black Forest Labs API | $0.15 | Read live |
| 5 | fal.ai FLUX 3 | $0.17 | Read live |
| 6 | Higgsfield | $0.183 to $0.290 | Listed 2026-10-30, not re-confirmed |
| 7 | Vidwip | $0.205 to $0.260 | Credits per second from our own pricing |
| 8 | Magnific | $0.340 | Listed 2026-10-30, not re-confirmed |
If you only trust prices we read live and that last, BFL’s $0.15 is the answer. The $0.0425 row disappears after November 7, and Krea’s figure is an estimate.
How we worked out price per second
Price per second is the plan price divided by its credits, times the credits one second costs. For a pay-per-second API it is the listed rate. Where a vendor shows only “videos per month”, we divide the plan price by the seconds those videos add up to.
All prices are US dollars, checked November 2026, for 720p with audio unless noted. Three rules:
- Resolution moves the price. BFL bills in classes: HD (up to 1 megapixel, 1280 x 704 at 16:9), FHD, 2K and 4K. We compare HD, the 720p class.
- Cheapest plan is not best-value plan. Higgsfield and Invideo show a range because the biggest plan costs far less per credit than the smallest.
- Promotions expire. fal’s lowest price has a stated end date.
What FLUX 3 Video is
FLUX 3 Video is Black Forest Labs’ video model. BFL’s blog post “FLUX 3 Video, Part 1: Generation” is dated August 4, 2026, after the July 23 FLUX 3 announcement. The docs label FLUX 3 a preview model.
BFL’s docs give 5 to 20 seconds per clip at 24 fps, with synchronized audio on by default. They also cover text, image and video-continuation modes, and 720p-class HD up to 4K. Vidwip runs the same 5 to 20 seconds at 720p with sound.
Can you self-host FLUX 3 Video?
Not that we could find. BFL’s pricing page lists open weights for FLUX 3 Image Klein, and its docs list them for FLUX 3 Action, but we found no downloadable FLUX 3 Video weights. Video runs through the API and partners, so the question is which host.
If you want to run video models on your own GPU, our open-source AI video models guide lists what exists.
1. Black Forest Labs API: $0.15, pay per second
Black Forest Labs sells FLUX 3 Video as pay-as-you-go, with no subscription or seat fee. Its pricing page lists text or image to video at $0.15 a second for HD, $0.24 for FHD, $0.28 for 2K and $0.41 for 4K, with audio included.
Black Forest Labs’ FLUX 3 Video price per video second, checked November 2026
| Mode | HD (720p class) | FHD | Draft (HD) |
|---|---|---|---|
| Text or image to video | $0.15 | $0.24 | $0.06 |
| Video to video | $0.21 | $0.27 | not offered |
A 20-second HD clip is $3.00. Partial seconds round up. The model page and some press coverage still show $0.17 for HD, so this looks like a recent cut: we quote the pricing page.
Draft mode renders a fast HD preview at $0.06 a second, which you can later commit at full quality. That is the cheapest way to explore ideas.
- Pros: the lowest steady rate, audio included, 4K option, Draft mode, and no commitment.
- Cons: you write API code or use the playground, and there is no editor.
2. fal.ai: $0.17, and $0.0425 until November 7
fal.ai hosts BFL’s model as flux-3 and charges $0.17 a second at 720p, $0.29 at 1080p, $0.32 at 2K and $0.47 at 4K. A 20-second 720p clip is $3.40.
fal also sells FLUX 3 Max, a variant it post-trained for prompt adherence and lower latency. Its page lists $0.0425 a second at 720p and $0.0725 at 1080p, and calls these promotional rates, 75% off from October 15 to November 7. After that, 720p goes to $0.17 and 1080p to $0.29.
Max takes 5 to 20-second clips, with audio on by default and optional.
- Pros: a developer-friendly API and a very low promo rate this week.
- Cons: 13% above BFL’s own price at the standard rate, and Max is not BFL’s model.
3. Krea: roughly $0.135 to $0.257 a second
Krea lists FLUX 3 Video in its plan table as about 7, 31 and 63 videos a month on Basic, Pro and Max, counted as 5-second clips at 720p in text-to-video mode.
Krea’s plans: $5, $21 and $63 a month billed yearly
Basic is $9 a month, or $5 yearly. Seven 5-second clips is about 35 seconds, so Basic works out to about $0.257 a second monthly and $0.15 yearly. Pro is $35 monthly or $21 yearly for about 155 seconds: $0.226 and $0.135 a second.
These come from rounded counts, so treat them as estimates. We could not confirm audio, and the Max column’s monthly price wasn’t shown.
- Pros: cheap yearly plans and a free daily allowance.
- Cons: estimated rates, and the plan’s units drain across every model you use.
4. Higgsfield: listed $0.183 to $0.290, not confirmed
Higgsfield bundles many models in one credit balance. Its pricing page, read live in annual mode, shows Basic at $9 a month for 120 credits, Pro at $23 for 600 and Max at $59 for 1,800.
Higgsfield’s plans, billed yearly
On 2026-10-30 we read FLUX 3 Video at $0.183 to $0.290 a second, the low end on the biggest plan. The pricing page publishes no FLUX rate, and a direct page for the model returned a 404 on November 6, so we could not re-confirm it. Credits round up per clip, so short clips cost more per second.
- Pros: one balance across many models.
- Cons: the FLUX rate isn’t published, and plan credits expire monthly.
5. Invideo: listed from $0.109, not confirmed
Invideo pairs models with a timeline editor. Its pricing page lists Basic, Pro and Ultra at $9, $30 and $80 a month, or $4, $15 and $40 billed annually, for 190, 1,000 and 3,000 credits.
Invideo’s plans: 190, 1,000 and 3,000 credits a month
On 2026-10-30 we read FLUX 3 Video at $0.109 or more a second, and up to $0.387, with the low end on the annual Ultra plan. Part of the range was inferred. The page publishes no FLUX credit rate, so we could not re-confirm it.
- Pros: an editor in the same plan, and a low annual price.
- Cons: the low end needs a $40-a-month annual plan, and the FLUX rate isn’t published.
6. Magnific: $0.340, listed once
Magnific is the new name for Freepik’s AI suite. On 2026-10-30 we read FLUX 3 Video at $0.340 a second on its cheapest monthly plan.
Magnific’s pricing page, shown in euros from our location
The page we read this week shows euros and lists no FLUX 3 Video credit cost, so we could not re-confirm the figure. Treat it as a lead.
- Pros: yearly credits and a large model catalog.
- Cons: no published FLUX rate, and the dearest figure here.
7. Vidwip: seventh of eight, with a timeline
Vidwip’s AI video generator runs FLUX.3 Video at 26 credits a second, 5 to 20 seconds at 720p with sound. It is dearer than BFL, fal and Krea’s yearly plans, and cheaper than Magnific’s listed rate.
| Clip | Credits | Pro annual ($0.0079) | Starter monthly ($0.01) |
|---|---|---|---|
| 5 seconds | 130 | $1.03 | $1.30 |
| 10 seconds | 260 | $2.05 | $2.60 |
| 20 seconds | 520 | $4.11 | $5.20 |
A credit costs $0.01 on Starter ($25 a month for 2,500) and $0.0079 on Pro billed yearly ($79 a month for 10,000). Our pricing page has the plans.
What the extra money buys:
- 16 video models on one balance. FLUX.3 Video runs beside Kling 3.0 and O1, Seedance 2.5, Veo 3.1 and Hailuo 3. See the models page.
- Shots land on a timeline. Clips drop into AI Studio, not a download folder.
- No API code. You type a prompt in a browser.
- On paid plans, from $25 a month. Starter’s 2,500 credits make about 96 seconds of FLUX 3 Video.
If you generate FLUX 3 Video in volume, BFL’s API beats us on price.
When an API beats a consumer plan
A pay-per-second API wins when your usage is lumpy. You pay for the seconds you generate, with no monthly credits to lose.
- Batch or automated work: BFL’s API, with Draft mode at $0.06 a second to filter ideas first.
- A few clips a month: an API. A plan you use 10% of costs more per second.
- Daily generation across many models: a plan can win, but check the FLUX rate in the generate panel first.
- Editing the result: a plan with a timeline, such as Vidwip or Invideo, saves exporting between tools.
Full comparison table
| Provider | Plan used | 720p $/s | Resolution options | Audio | Max clip | 20 s clip at 720p |
|---|---|---|---|---|---|---|
| fal.ai FLUX 3 Max | Pay per second, promo | $0.0425 | 720p, 1080p | Optional | 20 s | $0.85 |
| Invideo | Best value to cheapest | from $0.109 (listed) | Not confirmed | Not confirmed | Not confirmed | from $2.18 |
| Krea | Pro yearly to Basic monthly | about $0.135 to $0.257 | 720p counted | Not confirmed | Not confirmed | n/a |
| Black Forest Labs | Pay per second | $0.15 | HD to 4K | Included | 20 s | $3.00 |
| fal.ai FLUX 3 | Pay per second | $0.17 | 720p to 4K | Optional | 20 s | $3.40 |
| Higgsfield | Best value to cheapest | $0.183 to $0.290 (listed) | Not confirmed | Not confirmed | Not confirmed | $3.66 to $5.80 |
| Vidwip | Pro annual to Starter | $0.205 to $0.260 | 720p | Yes | 20 s | $4.11 to $5.20 |
| Magnific | Cheapest monthly | $0.340 (listed) | Not confirmed | Not confirmed | Not confirmed | $6.80 |
How to choose
Pick by how you work, not by the lowest cell in a table.
- Building an app or pipeline: BFL’s API. Use fal.ai if you already run other models there.
- Testing ideas cheaply: BFL’s $0.06 Draft mode.
- Prompting in a browser and cutting the result: Vidwip, for the timeline and the free credits.
- Comparing models first: read the Seedance 2.5 review. The same price exercise for other models is in the cheapest Wan 3.0 provider and cheapest Kling 3.0 provider posts.
Conclusion: who is the cheapest FLUX 3 Video provider?
Black Forest Labs’ own API is the cheapest steady FLUX 3 Video provider we could verify, at $0.15 a second for 720p with audio, then fal.ai at $0.17. fal’s FLUX 3 Max at $0.0425 is cheaper this week, and Krea’s yearly plans may be too.
Vidwip is $0.205 to $0.260 a second, so it sits seventh of eight. Choose it for the timeline and 16 models on one balance, not the rate.